User Tools

Site Tools


start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

start [2019/08/17 18:45] (current)
Line 1: Line 1:
 +====== How to buy ======
 +
 +Some products avaible for purchase on [[https://​www.tindie.com/​stores/​pontech/​|Tindie]] for all other products (including ones not listed on this web page) contact [[mailto:​sales@pontech.com|sales@pontech.com]]
 +
 +{{:​quick240-logo.png?​direct|}}
 +
 +Inspired by [[http://​arduino.cc/​|Arduino(tm)]],​ [[http://​chipkit.net/​|chipKIT(tm)]] technology in an industrial form factor.
 +
 +====== Quick Product Overview ======
 +{{:​quick-240-iso_ethernet_with_4_cards_25percent_alpha.png?​300|}}{{:​quick-240-iso_rail-ab_with_4_cards_25percent_alpha.png?​300|}}
 +
 +Quick(tm) (Quick Universal Industrial Control Kard) is based on [[http://​chipkit.net/​|chipKIT(tm)]] open source platform. ​ The Quick240 is designed for industrial automation systems where traditionally a ladder logic PLC might have been used. Since the Quick240 is an open platform for industrial automation it effectively extends the traditional life of a similarly proprietary. ​ This is achieved in several ways.
 +
 +  * Easier maintenance after the traditional "end of life" of an equivalent proprietary device since the tools are open. 
 +  * Devices can utilize new technology developed for the open source community that maybe slow or never come to a proprietary tool.  ​
 +
 +The initial adapters of the Quick240 will be [[http://​chipkit.net/​|chipKIT(tm)]] and [[http://​arduino.cc/​|Arduino(tm)]] users that need to implement industrial automation solutions. Quick(tm) allows for a polished package that presents a high end image rather than something that looks like a hobby or prototype. Quick(tm) is based on open source technologies so tools obsolescent is mitigated and entry cost is lower.
 +
 +The result is an Open Source PLC based on chipKIT technology.
 +
 +====== Under the Hood ======
 +{{:​quick-240_motherboard_connectors.png|}}
 +
 +The Quick system consists of a motherboard (Quick240) that has a Microchip (PIC32MX795F512L) microcontroller,​ high voltage (24V In) DC-DC converter that outputs 5V and a 3.3V linear regulator and seven Kard(tm) slots. ​ All of this is housed in a sleek DIN rail mountable plastic housing.
 +
 +Kard slots allow insertion of low cost signal conditioning circuits for interfacing the Microchip device to the industrial world. The board Drive Kard shown below will turn a single slot into a drive circuit for four relays or solenoid.
 +
 +{{:​kards:​drive_kard_source_back.png?​direct|}} {{:​kards:​drive_kard_source_front.png?​direct|}}
 +
 +====== Quick240 Videos ======
 +
 +[[https://​www.youtube.com/​watch?​v=Zs_rSHKv_LI&​list=UUFYaVs4It2fe5knXyDTs1ew|Quick240 Blink Sketch Video]]
 +
 +[[https://​www.youtube.com/​watch?​v=n9S0OUVVrm8&​list=UUFYaVs4It2fe5knXyDTs1ew|Quick240 Drive Kard Blink Sketch Video]]
 +
 +[[http://​youtu.be/​fKdPAQg0l6c|Kickstarter Revision X1 Video (may not be used)]]
 +
 +[[https://​www.youtube.com/​watch?​v=3ctn3qwlgRQ|Quick240 Serving Web Pages to an Android Tablet Demo]]
 +
 +[[https://​www.youtube.com/​watch?​v=09ckLqR05zA|Quick240 controlling three stepper motors]]
 +
 +[[https://​www.youtube.com/​watch?​v=fKdPAQg0l6c&​list=UUFYaVs4It2fe5knXyDTs1ew|Understanding Source & Sink]]
 +
 +[[https://​www.youtube.com/​watch?​v=2IdhJw5HJgQ&​list=UUFYaVs4It2fe5knXyDTs1ew|Ping Pong Ball Levitation]]
 +
 +====== Quick240 User Manual ======
 +[[Features]]
 +
 +[[Connections]] Power Supply, Jumpers and Pinout
 +
 +[[Development Tools]] Setting up MPIDE
 +
 +[[Bootloader]] Upgrading or replacing the bootloader
 +
 +[[Schematics]] and BOM's
 +
 +[[Asked Questions]] and answers
 +
 +====== Example Sketches ======
 +[[Serial Communications Sketches]] USB/​UART/​RS-233/​RS-485/​RS-422 and others.
 +
 +[[Drive Kard Sketches]]
 +
 +[[ISO Kard Sketches]]
 +
 +[[Android Communications]]
 +
 +[[sketches:​big_easy_rev_c_one_axis|One Axis Stepper Motor Controller]]
 +
 +[[Change Notification Interrupts]]
 +
 +[[demos:​pingponglev|PingPongLev Demo]] Code and BOM
 +
 +[[demos:​webserver|Web Server Demo]]
 +
 +
 +====== UpTick™ and UpTick Tickets™ for Com and IO ======
 +
 +^Image^Part Number^Description^Schematic^Layout^Availability^MSRP USD^Order^
 +|x|[[UpTick240]]|UpTick240 Mother Board with DIN Rail Housing|Open|Closed|Production|$149|Buy|
 +|x|[[UpTick241]]|UpTick241 Mother Board (bare board only)|Open|Closed|Production|$124|Buy|
 +|x|[[UTI-KTA100]]|Kard Ticket Adapter for TicketIO|Closed|Closed|Production|$29|Buy|
 +|x|[[UTI-FDP100]]|Drive Ticket (Source / P-Channel) for TicketIO|Closed|Closed|Production|$29|Buy|
 +|x|[[UTI-FDN100]]|Drive Ticket (Sink / N-Channel) for TicketIO|Closed|Closed|Production|$29|Buy|
 +|x|[[UTI-FDN101]]|Super Sink Drive Ticket (Sink / N-Channel) for TicketIO|Closed|Closed|Production|$29|Buy|
 +|x|[[UTI-RGBW100]]|RGB+W LED Drive Ticket (Sink / N-Channel) for TicketIO|Closed|Closed|Production|$29|Buy|
 +|x|[[UTI-ICC100]]|ISO Ticket (Common Cathode Isolated Input) for TicketIO|Closed|Closed|Production|$29|Buy|
 +|x|[[UTI-ICA100]]|ISO Ticket (Common Anode Isolated Input) for TicketIO Slot|Closed|Closed|Production|$29|Buy|
 +|x|[[UTI-PHX100]]|Light Curtain ISO Ticket for TicketIO Slot|Closed|Closed|Production|$29|Buy|
 +|x|[[UTI-BO100]]|BO100 Break-Out Ticket (User Selectable Passive Matrix Per Pin) for TicketIO |Open|Open|Production|$5|Buy|
 +|x|[[UTI-BO101]]|BO100 Break-Out Ticket (Configured for Optical Sensor Bias) for TicketIO Slot|Open|Open|Production|$12|Buy|
 +|x|[[UTC-SD100]]|Serial Driver (2-RS-485, 1xRS-232) Ticket for TicketCom|Open|Closed|Production|$29|Buy|
 +|x|[[UTC-SD101]]|Serial Driver (3-RS-485) Ticket for TicketCom|Open|Closed|Production|$29|Buy|
 +|x|[[UTI-DAC104]]|Four Channel 0-10VDC SPI DAC Ticket for TicketIO Slot|Closed|Closed|Pre-Production|$59|
 +|x|[[UTI-DAC101]]|One Channel 0-10VDC SPI DAC Ticket for TicketIO Slot|Closed|Closed|Pre-Production|$29|
 +|x|[[UTI-BODAC100]]|The BODAC Ticket - Three Break Out Connections and one 10-bit 0-10VDC SPI DAC, for TicketIO Slot Rail0 DAC, Rail1 NC, Rail2 NC, Rail3 NC|Closed|Closed|Pre-Production|$29|
 +|x|[[UTI-BODAC101]]|The BODAC Ticket - Three Break Out Connections and one 10-bit 0-10VDC SPI DAC, for TicketIO Slot (Rail0 DAC, Rail1 5v in analog, Rail2 10v in analog, Rail3 NC)|Closed|Closed|Pre-Production|$39|
 +[[Ticket ID]]
 +
 +====== Quick™ and Quick Kards™ for Com and IO ======
 +
 +[[https://​docs.google.com/​spreadsheet/​pub?​key=0ApaL-0qLgNhgdEp6Y19ZeVQ2M0pSdGFhbTB0WDJaTUE&​output=html|Quick KardIO Pin Mapping]]
 +
 +^Image^Part Number^Description^Schematic^Layout^Availability^MSRP USD^Order^
 +|{{:​quick-240-iso_ethernet_with_4_cards_25percent_alpha.png?​direct&​100|}}|Quick240|Quick240 Mother Board with DIN Rail Housing|Open|Closed|Production|$149|[[http://​pontech.com/​productdisplay/​quick240|Buy]]|
 +|{{:​quick-240-iso_ethernet_with_4_cards_25percent_alpha.png?​direct&​100|}}|Quick242|Quick242 Mother Board with DIN Rail Housing (USB Self Powered, external power must be provided)|Open|Closed|Production|$149|[[http://​pontech.com/​productdisplay/​quick240|Buy]]|
 +|{{:​quick-240_motherboard_connectors.png?​direct&​100|}}|Quick241|Quick240 Mother Board (bare board only)|Open|Closed|Production|$129|[[http://​pontech.com/​productdisplay/​quick241|Buy]]|
 +|{{:​kards:​drive_kard_source_back.png?​direct&​100|}} {{:​kards:​drive_kard_source_front.png?​direct&​100|}}|[[QKI-FDP100]]|Drive Kard (Source / P-Channel) for KardIO Slot|Closed|Closed|Production|$59|[[http://​pontech.com/​productdisplay/​drive-kard-source|Buy]]|
 +|{{:​kards:​drive_kard_sink_back.png?​direct&​100|}} {{:​kards:​drive_kard_sink_front.png?​direct&​100|}}|[[QKI-FDN100]]|Drive Kard (Sink / N-Channel) for KardIO Slot|Closed|Closed|Production|$29|[[http://​pontech.com/​productdisplay/​drive-kard-sink|Buy]]|
 +|TBD|[[QKI-FDN101]]|Drive Kard (Super Sink / N-Channel) for KardIO Slot|Closed|Closed|Production|$29|[[http://​pontech.com/​|Buy]]|
 +|{{:​kards:​ISO_Kard_Neg_Back.png?​direct&​100|}} {{:​kards:​ISO_Kard_Neg_Front.png?​direct&​100|}}|[[QKI-ICC100]]|ISO Kard (Common Cathode Isolated Input) for KardIO Slot|Closed|Closed|Production|$29|[[http://​pontech.com/​productdisplay/​iso-kard-common-vrail|Buy]]|
 +|{{:​kards:​ISO_Kard_Pos_Back.png?​direct&​100|}} {{:​kards:​ISO_Kard_Pos_Front.png?​direct&​100|}}|[[QKI-ICA100]]|ISO Kard (Common Anode Isolated Input) for KardIO Slot|Closed|Closed|Production|$29|[[http://​pontech.com/​productdisplay/​iso-kard-common-vrail-0|Buy]]|
 +|{{:​kards:​bo-100_kard_back.png?​direct&​100|}} {{:​kards:​bo-100_kard_front.png?​direct&​100|}}|[[QKI-BO100]]|BO100 Break-Out Kard (User Selectable Passive Matrix Per Pin) for KardIO Slot|Open|Open|Production|$3|[[http://​pontech.com/​productdisplay/​break-out-kard|Buy]]|
 +|{{:​kards:​bo-100_kard_back.png?​direct&​100|}} {{:​kards:​bo-100_kard_front.png?​direct&​100|}}|[[QKI-BO101]]|BO100 Break-Out Kard (Configured for Optical Sensor Bias PLPA-0132) for KardIO Slot|Open|Open|Production|$10|Buy|
 +|{{:​kards:​bigeasy_kard_back.png?​direct&​100|}} ​ {{:​kards:​bigeasy_kard_front.png?​direct&​100|}}|[[QKI-STP200]]|Big-Easy Kard (One Channel micro-step driver 2A per phase) for KardIO Slot|Open|Closed|Prototype|$39|
 +|{{:​kards:​spi-stepper-back-small.jpg?​direct&​100|none}}{{:​kards:​spi-stepper-front-small.jpg?​direct&​100|none}}|[[QKI-SPS100]]|SPI Stepper Kard (One Channel micro-step driver 2A per phase) for KardIO Slot|Open|Closed|Production|$59|
 +|x|[[QKI-BAB100]]|Bay Area Bridge Kard, (Dual H-Bridge Driver, 2.5A per H-Bridge|Closed|Closed|Download|$54|
 +|{{:​kards:​plpb-0052-rev-x1-front.jpg?​direct&​100|}} {{:​kards:​plpb-0052-rev-x1-back.jpg?​direct&​100|}}|[[QKC-CAN100]]|Can Driver Kard for KardIO Slot 5 only|Open|Closed|Prototype|$29|
 +|{{:​kards:​Com_Kard_Back.png?​direct&​100|}} {{:​kards:​Com_Kard_Front.png?​direct&​100|}}|[[QKC-SD100]]|Serial Driver Kard for KardCom Slot|Open|Closed|Production|$29|[[http://​pontech.com/​productdisplay/​serial-kard-com-slot|Buy]]|
 +|x|[[QKI-TC100]]|4 Input K Type Thermocouple Kard|Closed|Closed|Pre-Production|$99|
 +|x|[[QKI-DAC104]]|Four Channel 0-10VDC SPI DAC Kard for KardIO Slot|Closed|Closed|Pre-Production|$59|
 +|x|[[QKI-DAC101]]|One Channel 0-10VDC SPI DAC Kard for KardIO Slot|Closed|Closed|Pre-Production|$29|
 +|x|[[QKI-BODAC100]]|The BODAC Kard - Three Break Out Connections and one 10-bit 0-10VDC SPI DAC, for KardIO Slot Rail0 DAC, Rail1 NC, Rail2 NC, Rail3 NC|Closed|Closed|Pre-Production|$29|
 +|x|[[QKI-BODAC101]]|The BODAC Kard - Three Break Out Connections and one 10-bit 0-10VDC SPI DAC, for KardIO Slot (Rail0 DAC, Rail1 5v in analog, Rail2 10v in analog, Rail3 NC)|Closed|Closed|Pre-Production|$39|
 +|x|[[QKI-PT100]]|Pass Through Kard for KardIO Slot|Open|Open|N/​A|$3|
 +|x|[[QKI-BLANK]]|Kard Blanche (Kard Template)|Open|Open|Download|$0|
 +
 +
 +[[Kard ID]]
 +
 +[[Ideas and open questions]]
 +====== Sign me up for updates ======
 +{{url>​https://​docs.google.com/​forms/​d/​1FAnVBgYQKJFzy8bhI73pcYsS-H9Di6lzwIkbKpyHQI4/​viewform?​embedded=true noborder 100%,550px |Loading...}}
  
start.txt · Last modified: 2019/08/17 18:45 (external edit)